Page 53 - LIT-18626-14-04
P. 53

SportsBoat_F4V14.book  Page 45  Tuesday, July 5, 2022  2:34 PM



                                                                 Instrument operation

                        The no-wake mode can be used only when  Operating the boat at a steady speed
                        the engine is operating at idle speed.  (cruise assist)
                        To activate the no-wake mode:         The cruise assist feature is for steady engine
                        (1) Put the remote control lever in the TDE  speed operation when the boat is traveling
                            position or forward position so that the  above no-wake speeds. The cruise assist is
                            engine is operating at idle speed.  available for use whenever the engine is run-
                        (2) Push the plus side  of the no-wake  ning above 3000 rpm and below 7000 rpm.
                            mode /  cruise assist  switch. When the  To activate the cruise assist:
                            no-wake mode is activated, “No Wake”  (1) Push the remote control lever forward to
                            and the no-wake mode setting level will  open the throttle until the desired engine
                            be displayed under the boat speed.   speed is reached.
                                                              (2) Push the plus side or minus side of the
                                  SE      S      SW              no-wake mode/cruise assist switch.
                                                                 When  the cruise assist is activated,
                                                                 “CRUISE ASSIST” and the cruise assist
                                                                 setting level will be displayed under the
                                                                 boat speed.
                                         MPH
                                                                       SE      S      SW
                                      No Wake:
                                            1
                        1  No-wake mode setting level

                        TIP:                                                  MPH
                                                                          CRUISE ASSIST:
                        The no-wake mode can be set to 3 engine
                        speeds. To adjust the engine speed while the
                                                                                    1
                        no-wake mode is activated, push the plus
                        side or minus side of the no-wake mode /  1  Cruise assist setting level
                        cruise assist switch.
                                                              TIP:
                        To deactivate the no-wake mode:        Once the cruise assist is activated, the set
                        Perform one of the following operations.  engine speed can be increased by pushing
                         Push the minus side of the no-wake mode /  the plus side of the switch or decreased by
                          cruise assist switch until “No Wake” disap-  pushing the minus side. However, the ad-
                          pears.                               justment is limited to a maximum of 8 incre-
                         Push the remote control lever forward  to  ments above or below the initial cruise
                          open the throttle.                   assist  setting. Each time the  switch is
                                                               pushed, the engine speed will increase or
                                                               decrease approximately 100–200 rpm.






                                                                                               45
   48   49   50   51   52   53   54   55   56   57   58