Page 54 - LIT-18626-14-04

SportsBoat_F4V14.book Page 46 Tuesday, July 5, 2022 2:34 PM

Instrument operation

 While the cruise assist is activated, the en- Accessory outlet
gine speed can also be adjusted by operat- There is a 12 V DC outlet located on the helm.
ing the remote control lever.
NOTICE
To deactivate the cruise assist: Do not use an automotive cigarette lighter
Operate the remote control lever to decrease or other accessories that get hot because
the engine speed to 3000 rpm or less. Once the outlet can be damaged.
“Cruise” and the cruise assist setting level
195S
disappear, the cruise assist is deactivated.
Operating the boat in reverse with more
thrust (reverse RPM control)
Engine speed in reverse is limited to approx-
imately 4500 rpm. If more thrust is required
when the boat is traveling in reverse, use the
reverse RPM control. WARNING! Be pre-
12V 1
pared to reduce throttle as soon as the
boat moves as desired. Otherwise, the
boat may become unstable, which could
1 12 V DC outlet
result in loss of control and an accident.
To activate the reverse RPM control:
AR195 / SX195 / AR190 / SX190
(1) Move the remote control lever backward
so that the throttle is opened in reverse.
(2) Increase the engine speed to 4500 rpm,
and then push the plus side of the no-
wake mode / cruise assist switch.
AUDIO
TIP: AUX-USB
Once the reverse RPM control is activated,
pushing the plus side of the no-wake mode /
cruise assist switch will increase the available 12V 1
engine speed by approximately 500 rpm in 3
stages up to a maximum of 6000 rpm, and
1 12 V DC outlet
pushing the minus side will decrease the
available engine speed. However, the adjust-
ment is limited to these 3 increments.
To deactivate the reverse RPM control:
Operate the remote control lever to decrease
the engine speed to less than 4500 rpm.

46