Page 59 - LIT-18626-14-73

SportsBoat_F5K14.book Page 50 Wednesday, September 6, 2023 2:56 PM

Control function operation

To move forward or in reverse during DOCK To cancel the operation, push the “PIVOT
HOLD operation, pull the throttle/shift pad- TURN” switch again. When the switch is
dle. pushed, there will be two beep sounds, and
TIP: the switch will turn off.
Forward and reverse movement can be ad-
justed in 3 steps. High mode
During DRiVE X mode operation, it is possible
To cancel the operation, push the switch to increase the speed to a speed that is high-
again. When the switch is pushed, there will er than normal speed.
be two beep sounds, and the switch will turn To increase the speed, push the “HIGH
off. MODE” switch. When the switch is pushed,
there will be a single beep sound, and the
Pivot turn switch will light up.
It is possible to turn the boat while holding the HIGH MODE is applicable to the following
boat’s position. functions.
To turn the boat, push the “PIVOT TURN”  Sideways movement
switch. To turn the boat to the right, turn the  Dock hold
steering wheel right, and to turn the boat to  Pivot turn
the left, turn the steering wheel left. When the
switch is pushed, there will be a single beep To cancel the operation, push the “HIGH
sound, and the switch will light up. MODE” switch again. When the switch is
pushed, there will be two beep sounds, and
the switch will turn off.

Sideways movement calibration
If the boat does not move to the side during
sideways movement, you can adjust the op-
eration so that the boat moves to the side.

To perform sideways movement calibration:
(1) Put the boat in normal mode.
(2) Push and hold the “MODE” switch until
“DRiVE X calibration mode” appears on
the multi-function display.

50