Page 62 - LIT-18626-14-67

SportsBoat_F7G10.book Page 53 Wednesday, June 14, 2023 9:23 AM

Instrument operation

Operating the boat with a minimal  Push the minus side of the no-wake mode /
wake (no-wake mode) cruise assist switch until “No Wake” and
The no-wake mode is useful for operating the the no-wake mode setting level disap-
boat at a steady speed with a minimal wake. pears.
This is especially convenient when traveling  Push the remote control levers forward to
in harbors, channels, or other areas posted open the throttle.
with low speed limits as “no wake zones”.
Operating the boat in reverse with
The no-wake mode can be used only when more thrust (reverse RPM control)
the engine is operating at idle speed. Engine speed in reverse is limited to approx-
To activate the no-wake mode: imately 4500 rpm. If more thrust is required
(1) Put the remote control levers in the TDE when the boat is traveling in reverse, use the
position or forward position so that the reverse RPM control. WARNING! Be pre-
engine is operating at idle speed. pared to reduce throttle as soon as the
(2) Push the plus side of the no-wake boat moves as desired. Otherwise, the
mode / cruise assist switch. Once “No boat may become unstable, which could
Wake” and the no-wake mode setting result in loss of control and an accident.
level is displayed in the multifunction me- To activate the reverse RPM control:
ter, the no-wake mode is activated. (1) Move the remote control levers back-
ward so that the throttle is opened in re-
SE S SW
verse.
(2) Increase the engine speed to 4500 rpm,
and then push the plus side of the no-
wake mode / cruise assist switch.
TIP:
MPH Once the reverse RPM control is activated,
No Wake: pushing the plus side of the no-wake mode /
cruise assist switch will increase the available
1 engine speed by approximately 500 rpm in 3
1 No-wake mode setting level stages up to a maximum of 6000 rpm, and
pushing the minus side will decrease the
TIP: available engine speed. However, the adjust-
The no-wake mode can be set to 3 engine ment is limited to these 3 increments.
speeds. To adjust the engine speed while the To deactivate the reverse RPM control:
no-wake mode is activated, push the plus Operate the remote control levers to de-
side or minus side of the no-wake mode / crease the engine speed to less than 4500
cruise assist switch. rpm.

To deactivate the no-wake mode:
Perform one of the following operations.

53