Page 222 - LIT-18626-14-67
P. 222

SportsBoat_F7G10.book  Page 213  Wednesday, June 14, 2023  9:23 AM



                        Trouble recovery


                        TIP:
                        The rear platform hatch has interlocks to shut
                        off the engines should the hatch be acciden-
                        tally opened during operation.  The engines
                        will not restart unless the hatch is closed and
                        latched.

                        Raising the shift gates
                        (222SE / 222SD / 222XE / 222XD)        1
                        If the shift actuator malfunctions and the shift
                        gates remain in the lowered position, the boat  1  Manual release lever
                        will not be able to move forward.
                        After raising the shift gates so that the boat  (5) Use a screwdriver or similar tool to re-
                        can move forward, immediately return to  move the shift rod covers.
                        shore and have a Yamaha Boat Dealer ser-
                        vice the boat.                                    1
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip
                            from the engine shut-off switch.
                        (2) Open the driver’s side console compart-
                            ment. (See page 125.)
                        (3) Remove the nuts, and then remove the
                            shift motor cover.


                                             1                1  Shift rod cover

                                                              (6) Slide the shift rods to port (left) to raise
                                                                 the shift gates to the forward position.




                            2

                                                                                  1
                        1  Shift motor cover
                        2  Nut

                        (4) Move  the manual release levers of  the
                            shift motors to the manual operation po-
                            sition.
                                                              1  Shift rod




                        213
   217   218   219   220   221   222   223   224   225   226   227