Page 119 - LIT-18626-13-49

SportsBoat_F3R15.book Page 110 Friday, May 14, 2021 11:12 AM

Instrument operation

Drive control screen (8) Tap the up or down button to set the
This screen can be used to set a target speed amount of water for each bag.
for the boat, increase the set speed. (9) Wait a few minutes until the ballast level
reaches the desired level.
WKS WKB (10) Tap the “Back” button.
(11) After setting the preceding items, tap the
Target Speed 21.0
“Set” button.
Acceleration Fast
WKS WKB
Target Speed 21.0

Acceleration Fast
Set Save

To activate the drive control:
(1) Tap the tab you want to set.
(2) Tap the target speed. Set Save
(3) To set the speed, tap each digit and
scroll up or down, and then tap the (12) Move the remote control levers to the ful-
“Back” button. ly.

TIP:
 If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
8 0 ed acceleration profile or reach the set tar-
get speed.
9 1  If the single lever mode is activated, move
only the remote control lever for the port
engine to the fully open position. (See page
104 for information on the single lever
(4) Tap the desired acceleration profile.
mode button.)
(5) Tap the “Set” button, and then tap the
 212SD / 212XD: While the DRiVE mode is
“Save” button.
activated, the drive control mode cannot
(6) Select the characters you want to set,
be used.
tap the “Save” button.
TIP:
To deactivate the drive control:
Steps (7) to (10) are set only for models with
(1) Return the remote control levers to the
ballast.
neutral position.
(2) Tap the “CANCEL” button.
(7) Tap the ballast bag level.

110