Page 71 - LIT-18626-15-36

SportsBoat_F6D11.book Page 61 Friday, May 24, 2024 5:40 PM

Instrument operation

(6) Tap “ ” or “ ” to set the weight of TIP:
each ballast tank.  If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
ed acceleration profile or reach the set tar-
get speed.
Fill All Drain All  If the single lever mode is activated, move
35 45 35
only the remote control lever for the port
engine to the fully open position. (See page
54 for information on the single lever mode
button.)
Back Activate
 Boat speed is limited to 15 mph (24 km/h)
when deploying WakeBooster.
TIP:
 A warning message is displayed on the
 Tap “Fill All” to make all of the tanks 100%,
multi-function display when overcurrent
and tap “Drain All” to make all of the tanks
occurs. The button name on the side where
0%.
overcurrent has occurred turns red.
 Tap “Activate” to activate the ballast.
 222XD: While the DRiVE mode is activated,
the drive control mode cannot be used.
(7) Tap the “Port” button or “Stbd” button of
“SURFPOINTE”.
To deactivate the drive control:
(8) Tap “ ” to deploy, tap “ ” to stow.
(1) Return the remote control levers to the
Only one flap can be opened.
neutral position.
(2) Tap the “CANCEL” button.

Deploy Stow

Back

(9) Tap the “Save” button.
(10) Select the characters you want to set,
tap the “Save” button.
(11) After setting the preceding items, tap the
“Set” button.
(12) Move the remote control levers to the ful-
ly open position.

61