Page 218 - LIT-18626-14-73
P. 218

SportsBoat_F5K14.book  Page 209  Wednesday, September 6, 2023  2:56 PM



                        Trouble recovery


                        TIP:
                        The rear platform hatch has interlocks to shut  1
                        off the engines should the hatch be acciden-
                        tally opened during operation.  The engines
                        will not restart unless the hatch is closed and
                        latched.
                                                                                             2
                        Raising the shift gates
                        (252SE / 252SD / 252XE / 255XE /
                        255XD)
                        252SE / 252XE / 255XE: If the shift actuator  1  Shift motor cover
                        malfunctions and the shift gates remain in the  2  Nut
                        lowered position, the boat will not be able to
                        move forward.                         (4) Move the manual release levers of the
                        After raising the shift gates so that the boat  shift motors to the manual operation po-
                        can move forward, immediately return to  sition.
                        shore and have a Yamaha Boat Dealer ser-
                        vice the boat.
                        252SD / 255XD: This model cannot raise the
                        shift gate. If the shift gate remains lowered,
                        immediately contact a Yamaha Boat Dealer
                        or return to port immediately with only the en-
                        gine working properly. (See page 215.)
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip  1
                            from the engine shut-off switch.
                        (2) Open the driver’s side console compart-  1  Manual release lever
                            ment. (See page 115.)
                        (3) Remove the nuts, and then remove the  (5) Use a screwdriver or similar tool to re-
                            shift motor cover.                   move the shift rod covers.

                                                                          1












                                                              1  Shift rod cover


                        209
   213   214   215   216   217   218   219   220   221   222   223