Page 160 - LIT-18626-14-67

SportsBoat_F7G10.book Page 151 Wednesday, June 14, 2023 9:23 AM

Operation and handling requirements

(6) Loosen the oil tank filler cap and remove (10) Securely install the oil tank filler cap and
it, and then wipe the attached dipstick turn it until it stops.
clean. (11) Repeat the checking oil level procedure
for the other engine.
1 (12) Close the engine hood.

Checking the engine oil
(except for AR220 / SX220)
WARNING
Engine oil is extremely hot immediately af-
ter the engines are turned off. Coming in
contact with or getting any engine oil on
your clothes could result in burns.
1 Oil tank filler cap/Dipstick
NOTICE
(7) Screw the oil tank filler cap into the filler
hole until it stops. Remove the oil tank Make sure debris and water do not enter
filler cap again and make sure that the the oil filler hole. Debris and water in the
engine oil level is between the minimum engine oil can cause serious engine dam-
and maximum level marks. age.
To check the engine oil level:
(1) Place the boat in a precisely level posi-
tion on land with the engine stopped. If
the engine was running, allow the engine
oil to settle by waiting 5 minutes or more
before checking the oil level.
1 2 3 (2) Open the engine hood. (See page 122.)
(3) Remove the dipstick and wipe it clean.
3-star models (1900 cc engine)

1 Dipstick
2 Maximum level mark
3 Minimum level mark
(8) If the engine oil level is significantly 1
above the maximum level mark, consult
a Yamaha Boat dealer. If the engine oil
level is below the minimum level mark,
slowly add engine oil.
(9) Repeat steps (6)–(8) until the engine oil is
1 Dipstick
at the proper level.

151