Page 165 - LIT-18626-14-66

SportsBoat_F5K13.book Page 157 Tuesday, June 13, 2023 5:43 PM

Pre-operation checks

Engine shut-off switch check Cooling water pilot outlet check
Check the engine shut-off switch for proper Check that water comes out from the pilot
operation. outlets while the engines are running in the
(1) Start the engines. (See page 159 for in- water. If water is not circulating, something
formation on starting the engines.) may be clogging the intake grates. Refer to
(2) Pull the engine shut-off cord (lanyard) to “Jet pump clean-out procedure” on page
remove the clip from the engine shut-off 201.
switch to make sure that the engines Except for 255XE
stop immediately.
(3) Make sure that the engines cannot be
started with the clip removed from the
engine shut-off switch.
AR250 / SX250 / 252S

1

2
255XE

1 Engine shut-off switch
2 Clip

252SE / 252XE / 255XE

1

2

1 Engine shut-off switch
2 Clip

157