Page 169 - LIT-18626-14-66

SportsBoat_F5K13.book Page 161 Tuesday, June 13, 2023 5:43 PM

Operation

TIP: operator falls off, allowing the boat to
252SE / 252XE / 255XE: You can also push continue to run and cause an acci-
the “BLOWER” switch to ventilate the engine dent.
compartment. AR250 / SX250 / 252S

252S 1
2

3

1

1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
1 “BLOWER” switch
252SE / 252XE / 255XE
252SE / 255XE

3
1

1

2

1 Engine shut-off switch
1 “BLOWER” switch
2 Clip
(4) Attach the engine shut-off cord (lanyard) 3 Engine shut-off cord (lanyard)
to your PFD. Install the clip onto the en-
TIP:
gine shut-off switch by pushing the clip
The engines will not start when the clip is re-
groove over the nut beneath the knob.
moved from the engine shut-off switch.
Be sure the cord is not wrapped around
(5) Put the remote control levers in the neu-
the steering wheel or tangled in the con-
tral position. The starter motors will not
trols. WARNING! Check that the en-
operate unless the remote control levers
gine shut-off cord (lanyard) is
are in neutral.
attached correctly. If the engine shut-
(6) AR250 / SX250 / 252S: Turn the main
off cord (lanyard) is not attached cor-
switch keys to the start position and re-
rectly, it may not pull free when the
161