Page 48 - LIT-18626-13-47
P. 48

SportsBoat_F4Y11.book  Page 40  Wednesday, May 19, 2021  11:34 AM



                        Control function operation

                                                              ward position,  and then as the  levers are
                                                              moved farther, accelerates  the  engines for
                                                              more thrust. Moving the levers back from the
                                                              neutral position shifts into the reverse posi-
                                                              tion, and then as the levers are moved farther,
                                                              accelerates the engines for more thrust.
                                                              AR250 / SX250 / 252S: For cruising, adjust
                                                              the remote control levers so both engines are
                                                              running at the same engine speed.
                                         1                    TIP:

                        1  “START/STOP” button                Because of the mechanical throttle linkage,
                                                              the remote control levers may not be exactly
                        TIP:                                  even with one another when the engines are
                         The engine will not start when the clip is re-  running at the same engine speed.
                          moved from the engine shut-off switch.
                         The main switch will not operate (the starter
                                                                              N
                          motor  will not turn over) if the “START”    2       1
                                                                    F      5        5    R
                          switch in the rear underseat storage com-  3                  4
                          partment (port) is turned to the OFF posi-
                          tion. (See page 37 for more information.)  7                      7
                                                                            6     6
                        Remote control levers                  8                              8
                             WARNING
                         Before shifting, make sure there are no
                          swimmers  or obstacles in the water
                                                              1  Neutral position
                          near you.                           2  TDE position
                         When operating in reverse, go slowly.  3  Forward position
                          Do not open the throttle more than half.  4  Reverse position
                          Otherwise, the boat may become unsta-  5  Shift
                          ble, which could result in loss of control  6  Fully closed
                          and an accident.                    7  Throttle
                         Do not shift into reverse while traveling  8  Fully open
                          at planing speeds. Loss of control, boat
                                                              TIP:
                          swamping, or damage to the boat could
                                                              This boat is equipped with a “start-in-gear”
                          occur.
                                                              protection. The engines will not start unless
                        The remote control lever for each engine con-  the levers are in the neutral position.
                        trols both throttle and shifting. In normal op-
                        eration, the levers are moved together.  This boat uses a direct-drive propulsion sys-
                        Moving the  remote control levers  forward  tem. Therefore, jet thrust is always being pro-
                        from the neutral position shifts into the for-  duced while the engines  are  running. The


                        40
   43   44   45   46   47   48   49   50   51   52   53