Page 154 - LIT-18626-13-46
P. 154

SportsBoat_F4X13.book  Page 147  Friday, May 21, 2021  4:49 PM



                        Trouble recovery

                        Fuse replacement
                                                                                    10
                             WARNING
                                                              1 23 4       5      6
                        Do not use  fuses  of a higher amperage
                        than recommended. Substitution with  a
                        fuse that has an improper rating can cause                      7
                        extensive electrical system  damage  and
                        possible fire.                                                  8
                        If a fuse is blown, replace it with a spare fuse  9             7
                        of the correct amperage. If the boat is not
                        equipped with a spare fuse of the correct am-  1  Electronic throttle valve fuse (10 A)
                        perage, have a Yamaha Boat Dealer check  2  Fuel pump fuse (10 A)
                        and replace the fuse.                 3  Main relay drive fuse (10 A)
                        The fuses are in 4 locations on this boat.  4  Main fuse (20 A)
                                                              5  Spare fuse (50 A)
                                                              6  Fuse puller
                        Starboard engine compartment (stern   7  Screw
                        side of the compartment)              8  BCU (SCU) fuse (50 A)
                        (1) While pushing both sides of the fuse box
                                                              9  Spare fuse (10 A, 20 A)
                            cover inward, pull the cover toward the
                                                              10 Battery fuse (50 A)
                            bow and remove it.
                                                              (2) Replace the blown fuse with the spare
                                                                 fuse of the correct amperage by using
                                                                 the fuse puller.
                                                              TIP:
                                  1                           When replacing the BCU (SCU) fuse, remove
                                                              the screws, and then remove the fuse. Install
                                                              the spare fuse, and then tighten the screws.

                                                              (3) Install the fuse box cover.

                        1  Fuse box cover

















                        147
   149   150   151   152   153   154   155   156   157   158   159