Page 150 - LIT-18626-13-46
P. 150

SportsBoat_F4X13.book  Page 143  Friday, May 21, 2021  4:49 PM



                        Trouble recovery


                        TIP:
                        The lids for the port and starboard wet stor-
                        age compartments are each equipped with
                        an interlock to shut off the engines should the
                        lid be accidentally opened during operation.
                        The engines will not start if either the port or
                        starboard wet storage compartment lid is not
                        securely closed.
                                                               1
                        Raising the shift gates
                        If the shift actuator malfunctions and the shift  1  Manual release lever
                        gates remain in the lowered position, the boat
                        will not be able to move forward.     (5) Use a screwdriver or similar tool to re-
                        After raising the shift gates so that the boat  move the shift rod covers.
                        can move forward, immediately return to
                        shore and have a Yamaha Boat Dealer ser-          1
                        vice the boat.
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip
                            from the engine shut-off switch.
                        (2) Open the driver’s side console compart-
                            ment. (See page 75.)
                        (3) Remove the nuts, and then remove the
                            shift motor cover.
                                                              1  Shift rod cover
                                1
                                                              (6) Slide the shift rods to port (left) to raise
                                                                 the shift gates to the forward position.



                                                       2


                                                                                  1
                        1  Shift motor cover
                        2  Nut

                        (4) Move  the manual release levers of  the
                            shift motors to the manual operation po-
                                                              1  Shift rod
                            sition.



                        143
   145   146   147   148   149   150   151   152   153   154   155