Page 93 - LIT-18626-12-95

Instrument operation

Drive control screen TIP:
This screen can be used to set a target speed z If the remote control levers are moved
for the boat, increase the set speed. slowly to the fully open position, the boat
may not accelerate according to the select-
WKS WKB ed acceleration profile or reach the set tar-
Target Speed 21.0 get speed.
z If the single lever mode is activated, move
Acceleration Fast
only the remote control lever for the port
engine to the fully open position. (See page
79 for information on the single lever mode
button.)
z 252SD: While the DRiVE mode is activated,
Set Save
the drive control mode cannot be used.
To deactivate the drive control:
To activate the drive control:
(1) Return the remote control levers to the
(1) Tap the tab you want to set.
neutral position.
(2) Tap the target speed.
(2) Tap the “CANCEL” button.
(3) To set the speed, tap each digit and
scroll up or down, and then tap the
“Back” button.

8 0

9 1

(4) Tap the desired acceleration profile.
(5) Tap the “Set” button, and then tap the
“Save” button.
(6) Select the characters you want to set,
tap the “Save” button.
(7) After setting the preceding items, tap the
“Set” button.
(8) Move the remote control levers to the ful-
ly open position.

85