Page 146 - LIT-18626-12-95

Operation and handling requirements

Draining the bilge water Engine compartment
NOTICE
z Do not run the engines at full throttle
when bilge water remains in the engine
compartment. The bilge water can 1
splash into the engines, which can result
in severe damage.
z Be sure all drain plugs are tightened be-
fore operating your boat. Otherwise,
water may flood the boat and cause it to
submerge. 1 Engine compartment drain plug

To drain the bilge water from the hull:
Draining the bilge water on land Remove the hull drain plug at the stern to
This model is equipped with multiple drain drain the water. Check the condition of the O-
plugs. ring on the hull drain plug, and then securely
Bilge water from the various compartments install the drain plug.
flows through drain passages and collects in
the bottom of the hull. The bilge water can be
drained from the boat by removing the hull
drain plugs.

Ski locker

1
1 Hull drain plug

1

1 Drain plug

138