Page 136 - LIT-18626-15-35

SportsBoat_F7F10.book Page 125 Monday, May 27, 2024 9:57 AM

Pre-operation checks

Cooling water pilot outlet check
Check that water comes out from the pilot
outlets while the engines are running in the
water. If water is not circulating, something
may be clogging the intake grates. Refer to
“Jet pump clean-out procedure” on page
165.
252XE

Post-launch checks
Perform the post-launch checks in the pre-
operation checklist while the boat is in the
water and the engines are running.

Engine shut-off switch check
Check the engine shut-off switch for proper
operation.
255XE / 255XD
(1) Start the engines. (See page 127 for in-
formation on starting the engines.)
(2) Pull the engine shut-off cord (lanyard) to
remove the clip from the engine shut-off
switch to make sure that the engines
stop immediately.
(3) Make sure that the engines cannot be
started with the clip removed from the
engine shut-off switch.

1

2

1 Engine shut-off switch
2 Clip

125