Page 134 - LIT-18626-15-35

SportsBoat_F7F10.book Page 123 Monday, May 27, 2024 9:57 AM

Pre-operation checks

To check the operation using the multi-func-  Do not install lights that could diminish
tion display: the visibility of manufacturer installed
Tap the “Blower” button. Check that the navigation lights or be confused with the
blowers operate when the button is blue and manufacturer installed navigation lights.
that the blowers stop when the button is gray.  Do not install lights that interfere with
the operator’s ability to maintain proper
lookout.
SE
FUEL  Do not modify the manufacturer in-
100 %
stalled navigation lights.
19
x1000 rpm Make sure that the bow light and anchor light
operate properly. (See page 92.)
START
13.0 V 9
TIP:
Bilge Blower
Before operating the boat in daylight hours
1
after checking the navigation and anchor
1 “Blower” button
lights, store the anchor light.
255XE / 255XD
To check the operation using the switch pan- 2
el:
Push the “BLOWER” switch. Check that the 1
blowers operate when the switch light is on
and that the blowers stop when the switch
light is off.

1 1 Bow light
2 Anchor light
To check the operation using the multi-func-
tion display:
(1) Tap the “Nav” (Navigation) light button
on the system control screen. Check that
the bow light and anchor light come on
1 “BLOWER” switch
when the button is blue and that both
lights go off when the button is gray.
Navigation and anchor lights checks
(2) Tap the “Anchor” light button on the sys-
WARNING tem control screen. Check that only the
 Do not install lights that could be mis- anchor light comes on when the button is
taken for navigation lights. blue and that the anchor light goes off
when the button is gray.

123