Page 103 - LIT-18626-15-33

SportsBoat_F6A12.book Page 92 Thursday, May 30, 2024 4:19 PM

Operation and handling requirements

Bucket storage compartment while the boat is moored or moving in re-
1 verse.

Bilge pump
Your boat is equipped with a drainage sys-
tem that channels water that enters the boat
from the storage compartments to the bilge
under the engine compartment.
When the bilge pump switch is turned on, the
bilge pump will operate.

1 Bucket storage compartment drain plug 1
To drain the bilge water from the hull:
Remove the hull drain plug at the stern to
drain the water. Check the condition of the ACC 1 ACC 2 LIVEWELL BILGE HORN
O-ring on the hull drain plug, and then se-
curely install the drain plug.

1 Bilge pump switch
Even if the bilge pump switch is not turned
on, the bilge pump will detect when there is
excessive water in the bilge and will automat-
ically drain most of it through the bilge pump
1 outlet. This function works automatically,
even if the battery switches are turned to the
1 Hull drain plug off position.
Draining the bilge water on water
This model is equipped with a self-draining
deck and bilge pump to drain the bilge water 1
on water.

Self-draining deck
Most water that enters the deck area drains
automatically out the stern through the large
drain holes in the deck.
A one-way check valve in each drain pre-
1 Bilge pump outlet
vents water from traveling back to the deck

92