Page 176 - LIT-18626-15-30

SportsBoat_F7G11.book Page 164 Friday, May 24, 2024 6:06 PM

Pre-operation checks

 Do not install lights that interfere with
the operator’s ability to maintain proper
NW N NE
FUEL DEPTH lookout.
50 % FLOAT MODE 0 Ft
 Do not modify the manufacturer in-
stalled navigation lights.
°F
Water Temp
Make sure that the bow light and anchor light
START HOUSE
11.8 V 11.8 V operate properly.
The procedure for setting up the anchor light
Bilge Blower Nav Anchor
varies according to the model. See the page
1
indicated below for your boat.
1 “Blower” button
SX220: See page 131.
TIP:
222SE / 222SD
SX220: Before operating the boat in daylight
To check the operation using the switch pan-
hours after checking the navigation and an-
el:
chor lights, store the anchor light.
Push the “BLOWER” switch. Check that the
Except for SX220
blowers operate when the switch light is on
and that the blowers stop when the switch
light is off.
2
1
1

1 Bow light
2 Anchor light

1 “BLOWER” switch
Navigation and anchor lights checks
WARNING
 Do not install lights that could be mis-
taken for navigation lights.
 Do not install lights that could diminish
the visibility of manufacturer installed
navigation lights or be confused with the
manufacturer installed navigation lights.

164