Page 172 - LIT-18626-14-73

SportsBoat_F5K14.book Page 163 Wednesday, September 6, 2023 2:56 PM

Pre-operation checks

Engine shut-off switch check Cooling water pilot outlet check
Check the engine shut-off switch for proper Check that water comes out from the pilot
operation. outlets while the engines are running in the
(1) Start the engines. (See page 165 for in- water. If water is not circulating, something
formation on starting the engines.) may be clogging the intake grates. Refer to
(2) Pull the engine shut-off cord (lanyard) to “Jet pump clean-out procedure” on page
remove the clip from the engine shut-off 207.
switch to make sure that the engines Except for 255XE / 255XD
stop immediately.
(3) Make sure that the engines cannot be
started with the clip removed from the
engine shut-off switch.
AR250 / SX250 / 252S

1

2
255XE / 255XD

1 Engine shut-off switch
2 Clip

252SE / 252SD / 252XE / 255XE / 255XD

1

2

1 Engine shut-off switch
2 Clip

163