Page 181 - LIT-18626-14-67

SportsBoat_F7G10.book Page 172 Wednesday, June 14, 2023 9:23 AM

Operation

TIP: operator falls off, allowing the boat to
Except for 222S: You can also push the continue to run and cause an acci-
“BLOWER” switch to ventilate the engine dent.
compartment. AR220 / SX220 / 222S

AR220 / SX220 1
2

3
1

1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
1 “BLOWER” switch
222SE / 222SD / 222XE / 222XD
222SE / 222SD / 222XE / 222XD
1

3

1

2

1 Engine shut-off switch
1 “BLOWER” switch
2 Clip
(4) Attach the engine shut-off cord (lanyard) 3 Engine shut-off cord (lanyard)
to your PFD. Install the clip onto the en-
TIP:
gine shut-off switch by pushing the clip
The engines will not start when the clip is re-
groove over the nut beneath the knob.
moved from the engine shut-off switch.
Be sure the cord is not wrapped around
(5) Put the remote control levers in the neu-
the steering wheel or tangled in the con-
tral position. The starter motors will not
trols. WARNING! Check that the en-
operate unless the remote control levers
gine shut-off cord (lanyard) is
are in neutral.
attached correctly. If the engine shut-
(6) AR220 / SX220 / 222S: Turn the main
off cord (lanyard) is not attached cor-
switch keys to the start position and re-
rectly, it may not pull free when the
172