Page 124 - LIT-18626-14-67

SportsBoat_F7G10.book Page 115 Wednesday, June 14, 2023 9:23 AM

Instrument operation

Flush-out ballasts (222XE / 222XD)  If the flush-out time is not sufficient to re-
The flush-out ballasts can be used to drain move all the water from a tank, continue
the water in the ballast tanks with the multi- the draining process until it is empty. Stop
function display unit. the process immediately once all the water
has been removed from each tank.
To drain the water in a ballast tank: If you have any questions, consult a
(1) Tap the Drive Control Screen Tab. Yamaha Boat Dealer.
(2) Tap Ballast Level.
(3) Set the value of the tank you want to (5) When finished, tap “ON” to return to the
drain to 0. previous screen.

Fill All Drain All
0 0 0

Back Activate

(4) Tap “ ”. “Ballast Overdrain Initiated” is
displayed, and draining starts.

Ballast Overdrain Initiated

Port Center Stbd
30 30 30

OFF ON OFF

TIP:
 The flush-out time cannot be adjusted. The
default setting is 30 seconds to avoid dam-
aging a ballast pump when there is no wa-
ter remaining in a tank and/or to prevent
excessive battery drain.

115