Page 197 - LIT-18626-14-66
P. 197

SportsBoat_F5K13.book  Page 189  Tuesday, June 13, 2023  5:43 PM



                                                                             Maintenance


                                                                       Initial  Thereafter every
                                                                               50    100    200
                                Item                Operation                 hours   hours   hours
                                                                        10
                                                                       hours  or 12   or 12   or 24
                                                                             months  months  months
                                                                               *1     *1     *1
                         Valve clearance   Check and adjust                                 √ *2
                         Rubber couplings  Check for looseness and noise                     √
                         Engine mounts     Check for damage and peeling                      √
                         Cooling water hoses   Check for damage, and check con-
                         and cooling water pi-  nections                                     √
                         lot outlet hoses
                         Water inlet strainers  Check for damage         √            √
                         Intake grates     Check for damage              √            √
                                           Check for bends, damage, and for-
                         Impellers                                       √            √
                                           eign material
                         Impeller ducts    Check and lubricate                        √
                                           Check for damage and lubricate
                         Drive shaft spline                                                  √
                                           splines
                                           Check bearings and grease condi-
                         Jet pump bearings                                                   √
                                           tion
                         Jet thrust nozzles  Check movement, and lubricate            √
                         Intermediate hous-  Lubricate                                √
                         ings
                         Anodes (jet pump   Check for corrosion                       √
                         units)
                        *1: Whichever comes first.
                        *2: Check every 200 hours.
                        Perform the pre-operation checks and  post-operation checks  before  performing  periodic
                        maintenance.





















                                                                                             189
   192   193   194   195   196   197   198   199   200   201   202