Page 139 - LIT-18626-14-66

SportsBoat_F5K13.book Page 131 Tuesday, June 13, 2023 5:43 PM

Equipment operation

(3) Push the snap button and shorten each (5) Remove the front support poles from the
rear support pole to the short position. wakeboard tower, and then place the
poles in the flap of the bimini top.

1
1

2

3

1 Rear support pole
2 Short position 1 Front support pole
3 Snap button
(6) Pull the front of the bimini top toward the
NOTICE stern, wrap the bimini top around the
main pole, and then install the storage
Be careful not to push the snap button and
cover.
extend the pole too far. Otherwise, the
lower section of the pole could fall into the
Trailering with the bimini top
water.
The bimini top must be secured to the boat
(4) Hook the rear support poles onto the when it is being trailered. When the boat is
main pole, and then pull the rear of the trailered with a genuine Yamaha boat cover,
bimini top toward the bow. simply store the bimini top in the fully col-
lapsed position and install the storage cover.
If a boat cover is not used, wrap an elastic
cord around the top and secure the ends to
the tow pylon on the wakeboard tower to re-
2
strict movement.
1
Removing the bimini top
To remove the bimini top:
(1) Store the bimini top. See “Storing the bi-
mini top”.
(2) While supporting the bimini top, rotate
1 Rear support pole
the lock pins securing the main pole to
2 Main pole
the wakeboard tower, and then remove
the top.

131