Page 49 - LIT-18626-14-65

SportsBoat_F4X15.book Page 42 Friday, June 16, 2023 8:43 AM

Control function operation

To cancel the operation, push the “PIVOT
TURN” switch again. When the switch is
pushed, there will be two beep sounds, and
the switch will turn off.

High mode
During DRiVE X mode operation, it is possible
to increase the speed to a speed that is high-
er than normal speed. DRiVE X calibration mode
To increase the speed, push the “HIGH
MODE” switch. When the switch is pushed,
(3) Push the “HIGH MODE” switch, and se-
there will be a single beep sound, and the
lect the engine speed.
switch will light up.
(4) Push the switch of the function you want
HIGH MODE is applicable to the following
to adjust.
functions.
 Sideways movement
 Dock hold
 Pivot turn
1 3
To cancel the operation, push the “HIGH 2 4
MODE” switch again. When the switch is
pushed, there will be two beep sounds, and
the switch will turn off.

Sideways movement calibration
1 “ ” switch
If the boat does not move to the side during
2 “ DOCK HOLD” switch
sideways movement, you can adjust the op-
3 “ ” switch
eration so that the boat moves to the side.
4 “ DOCK HOLD” switch
To perform sideways movement calibration: (5) When the boat starts moving, operate
(1) Put the boat in normal mode. the steering wheel and throttle/shift pad-
(2) Push and hold the “MODE” switch until dle so that the boat starts moving to the
“DRiVE X calibration mode” appears on side.
the multi-function display. (6) When the “MODE” switch is pushed,
“DRiVE X calibration is successful” is
displayed, and the boat returns to normal
mode.

42