Page 56 - LIT-18626-13-52

SportsBoat_F4A14.book Page 49 Monday, May 17, 2021 1:01 PM

Instrument operation

gine speed is reached and both engines Operating the boat in reverse with
are operating at the same engine speed. more thrust (reverse RPM control)
(2) Push the plus side or minus side of the Engine speed in reverse is limited to approx-
no-wake mode/cruise assist switch. imately 4500 rpm. If more thrust is required
Once “Cruise” is displayed in the multi- when the boat is traveling in reverse, use the
function meter, the cruise assist is acti- reverse RPM control. WARNING! Be pre-
vated. pared to reduce throttle as soon as the
boat moves as desired. Otherwise, the
boat may become unstable, which could
10:27 am
result in loss of control and an accident.
FUEL WATER
0 (1) Move the remote control levers back-
100% 67°F To activate the reverse RPM control:
MPH
ward so that the throttle is opened in re-
Cruise +4
verse and both engines are operating at
0.3 Avg MPG the same engine speed.
12.3V 12.3V (2) Increase the engine speed to 4500 rpm,
and then push the plus side of the no-
wake mode/cruise assist switch.
TIP:
TIP:
 Once the cruise assist is activated, the set
Once the reverse RPM control is activated,
engine speed can be increased by pushing
pushing the plus side of the no-wake
the plus side of the switch or decreased by
mode/cruise assist switch will increase the
pushing the minus side. However, the ad-
available engine speed by approximately
justment is limited to a maximum of 8 incre-
500 rpm in 3 stages up to a maximum of
ments above or below the initial cruise
6000 rpm, and pushing the minus side will
assist setting. Each time the switch is
decrease the available engine speed. Howev-
pushed, the engine speed will increase or
er, the adjustment is limited to these 3 incre-
decrease approximately 100–200 rpm.
ments.
 While the cruise assist is activated, the en-
gine speed can also be adjusted by operat-
To deactivate the reverse RPM control:
ing the remote control levers.
Operate the remote control levers to de-
crease the engine speed to less than
To deactivate the cruise assist:
4500 rpm.
Operate the remote control levers to de-
crease the engine speed to 3000 rpm or less.
Once “Cruise” disappears, the cruise assist is
deactivated.

49