Page 55 - LIT-18626-13-52

SportsBoat_F4A14.book Page 48 Monday, May 17, 2021 1:01 PM

Instrument operation

Communication error warning (2) Push the plus side of the no-wake
If a generic error is detected, a warning will mode/cruise assist switch. Once “No
appear on the multi-function display and the Wake Mode” is displayed in the multi-
buzzer will sound. If this occurs, reduce the function meter, the no-wake mode is ac-
engine speed, return to shore, and have a tivated.
Yamaha Boat Dealer check the boat.
10:27 am
No-wake mode/cruise assist switch
FUEL WATER
This switch activates and sets the no-wake 100% 67°F
mode, cruise assist, and reverse RPM con- 0 MPH
trol.
No Wake Mode
0.3 Avg MPG
12.3V 12.3V

JET
WASH TIP:
The no-wake mode can be set to 3 engine
1 speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus
side or minus side of the no-wake
mode/cruise assist switch.
1 No-wake mode/cruise assist switch
To deactivate the no-wake mode:
To operate the no-wake mode and cruise as-
Perform one of the following operations.
sist, see the following sections. To activate
 Push the minus side of the no-wake
the reverse RPM control, see “Reverse RPM
mode/cruise assist switch until “No Wake
control” on page 49.
Mode” disappears.
 Push the remote control levers forward to
Operating the boat with a minimal open the throttle.
wake (no-wake mode)
The no-wake mode is useful for operating the
Operating the boat at a steady speed
boat at a steady speed with a minimal wake.
(cruise assist)
This is especially convenient when traveling
The cruise assist feature is for steady engine
in harbors, channels, or other areas posted
speed operation when the boat is traveling
with low speed limits as “no wake zones”.
above no-wake speeds. The cruise assist is
The no-wake mode can be activated only
available for use whenever the engines are
when the engines are operating at idle speed.
running above 4000 rpm and below 7000
To activate the no-wake mode:
rpm.
(1) Put the remote control levers in the TDE
To activate the cruise assist:
position or forward position so that both
(1) Push the remote control levers forward
engines are operating at idle speed.
to open the throttle until the desired en-
48