Page 187 - LIT-18626-12-95

Maintenance

Maintenance Removing and installing the engine
covers
WARNING
The engine cover of each engine is remov-
Be sure to turn off the engines when you able.
perform maintenance unless otherwise To remove the engine cover:
specified. If you are not familiar with ma- (1) Open the engine hood. (See page 103.)
chine servicing, this work should be done (2) Remove the engine cover screws.
by a Yamaha Boat Dealer or other quali-
fied mechanic.
Maintenance, replacement, or repair of the
emission control devices and system may be 1
performed by any marine SI engine repair es-
tablishment or individual. Warranty repair,
however, must be performed at an autho-
rized Yamaha Boat Dealer. A service manual
is available for purchase through a Yamaha
Boat Dealer for owners who have the me-
chanical skills, tools, and other equipment 1 Engine cover screw
necessary to perform maintenance not cov-
(3) Lift up the engine cover and remove it.
ered by this owner’s/operator’s manual.
Owner’s/operator’s manual
It is advisable to always carry the own-
er’s/operator’s manual with you whenever 1
you use the boat.
To protect these materials from water dam-
age, it would be a good idea to put them in a
waterproof bag. If your owner’s/operator’s
manual is damaged, order a replacement
from a Yamaha Boat Dealer.
The service information included in this man- 1 Engine cover
ual is intended to provide you, the owner,
with the necessary information for complet- To install the engine cover:
ing your own preventive maintenance and (1) Place the engine cover in its original po-
minor repairs. sition, and then push it down.

179