Page 152 - LIT-18626-12-95

Pre-operation checks

252SE / 252XE: Start the engines before per- Throttle/shift paddle checks (252SD)
forming the following checks. NOTICE: Do Operate the throttle/shift paddles several
not run the engines over 4000 r/min on times to make sure that operation is smooth
land. Also, do not run the engines for more throughout the whole range. Also, make sure
than 15 seconds without supplying water, that the throttle/shift paddles return automat-
otherwise, the engines could overheat ically to their original positions when re-
and/or seize. leased.
Check that the shift gates are slightly above
the shift gate neutral position when the re- 1
mote control levers are in the forward posi-
tion, and that the shift gates are in the fully
open position when the remote control levers
are moved farther forward.
Fully open position
1
1
1 Throttle/shift paddle
2 Fire extinguisher check
As an inboard boat less than 26 feet in length,
your boat must be fitted with one 5-B (B-1)
type fire extinguisher when navigating waters
controlled by the U.S. Coast Guard. In addi-
1 Shift gate tion, most state and local boating laws re-
2 Jet thrust nozzle quire that the craft carry a USCG-approved
fire extinguisher whenever the boat is operat-
Check that the shift gates are in the fully
ed.
closed position when the remote control le-
Make sure at least one fire extinguisher is
vers are in the reverse position.
aboard and full; two fire extinguishers are
Fully closed position
recommended. See the instructions supplied
by the extinguisher manufacturer to deter-
mine the indication of the condition.
1
A fire extinguisher is not standard equipment
with this boat. If you do not have a fire extin-
guisher, contact your local Yamaha Boat
Dealer or fire extinguisher dealer for one
meeting the proper specifications.

1 Shift gate

144