Page 76 - LIT-18626-15-35

SportsBoat_F7F10.book Page 65 Monday, May 27, 2024 9:57 AM

Instrument operation

(6) Tap “ ” or “ ” to set the weight of (12) Move the remote control levers to the ful-
each ballast tank. ly open position.
TIP:
 If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
ed acceleration profile or reach the set tar-
Fill All Drain All
35 45 35
get speed.
 If the single lever mode is activated, move
only the remote control lever for the port
engine to the fully open position. (See page
Back Activate
58 for information on the single lever mode
button.)
TIP:
 255XE / 255XD: Boat speed is limited to 15
 Tap “Fill All” to make all of the tanks 100%,
mph (24 km/h) when deploying Wake-
and tap “Drain All” to make all of the tanks
Booster.
0%.
 255XE / 255XD: A warning message is dis-
 Tap “Activate” to activate the ballast.
played on the multi-function display when
overcurrent occurs. The button name on
(7) 255XE / 255XD: Tap the “Port” button or
the side where overcurrent has occurred
“Stbd” button of “SURFPOINTE”.
turns red.
(8) 255XE / 255XD: Tap “ ” to deploy, tap
 255XD: While the DRiVE X mode is activat-
“ ” to stow.
ed, the drive control mode cannot be used.
To deactivate the drive control:
(1) Return the remote control levers to the
neutral position.
Deploy Stow
(2) Tap the “CANCEL” button.

Back

TIP:
Only one flap can be opened.
(9) Tap the “Save” button.
(10) Select the characters you want to set,
tap the “Save” button.
(11) After setting the preceding items, tap the
“Set” button.

65