Page 122 - LIT-18626-15-35

SportsBoat_F7F10.book Page 111 Monday, May 27, 2024 9:57 AM

Operation and handling requirements

Draining the bilge water Engine compartment
1800 cc engine models
NOTICE
 Do not run the engines at full throttle
when bilge water remains in the engine
compartment. The bilge water can
splash into the engines, which can result 1
in severe damage.
 Be sure all drain plugs are tightened be-
fore operating your boat. Otherwise,
water may flood the boat and cause it to
submerge.
1 Engine compartment drain plug

Draining the bilge water on land 1900 cc engine models
This model is equipped with multiple drain
plugs.
Bilge water from the various compartments
flows through drain passages and collects in
the bottom of the hull. The bilge water can be
drained from the boat by removing the hull 1
drain plugs.

Ski locker

1 Engine compartment drain plug

To drain the bilge water from the hull:
Remove the hull drain plug at the stern to
drain the water. Check the condition of the O-
ring on the hull drain plug, and then securely
1 install the drain plug.

1 Drain plug

111