Page 139 - LIT-18626-15-34

SportsBoat_F6B15.book Page 129 Monday, May 27, 2024 11:12 AM

Trouble recovery

2
1
1
3

1 Access port cap 1 “SET” mark
2 Slot A
(5) Remove any weeds or debris from the 3 Slot B
drive shaft, impeller, pump housing, and
jet thrust nozzle. If you cannot remove (8) Check that the cap is parallel to the cen-
the debris, consult a Yamaha Boat Deal- terline of the boat. Pull the handle force-
er. fully to make sure that the cap is locked
(6) To reinstall the access port cap, first securely. If a strong pull will move the ac-
clean off any sand or other foreign matter cess port cap, it is not locked securely—
from the cap or port surfaces. Apply a the cap could be forced out by water
light coat of Yamalube Waterproof Ma- pressure during operation.
rine Grease (P/N: ACC-GREAS-10-CT), if 1
available, to the seal of the access port
cap. If grease is not available, apply the
grease during the post-operation
checks.
(7) Insert the cap so that the “SET” mark is
aligned with the slot A, and then while
pushing the handle turn the cap clock-
wise until the “SET” mark is aligned with
the slot B.
1 Parallel to the centerline of the boat

(9) Close the rear platform hatch.
NOTICE
Be sure the access port cap is locked se-
curely in place. Otherwise, the cap could
be forced out of the access port by water
pressure, causing loss of performance
and possible damage.

129