Page 72 - LIT-18626-15-32
P. 72

SportsBoat_F6H15.book  Page 62  Tuesday, June 4, 2024  5:17 PM



                        Instrument operation

                        No-wake mode/cruise assist switch
                        This switch activates and sets the no-wake     SE      S      SW
                        mode, cruise assist, and reverse RPM con-
                        trol.



                                                                              MPH
                                                                            No Wake:
                                                      BLOWER
                                                                                 1
                                                              1  No-wake mode setting level
                                                         1
                                                              TIP:
                                                              The no-wake mode can be set to 3 engine
                        1  No-wake mode/cruise assist switch  speeds. To adjust the engine speed while the
                                                              no-wake mode is activated, push the  plus
                        To operate the no-wake mode and cruise as-  side  or minus side of  the no-wake
                        sist, see the following sections. To activate  mode/cruise assist switch.
                        the reverse RPM control, see “Reverse RPM
                        control” on page 63.                  To deactivate the no-wake mode:
                                                              Perform one of the following operations.
                        Operating the boat with a minimal      Push the minus side of  the  no-wake
                        wake (no-wake mode)                    mode/cruise assist switch until “No Wake
                        The no-wake mode is useful for operating the  Mode” disappears.
                        boat at a steady speed with a minimal wake.   Push the remote control levers forward to
                        This is especially convenient when traveling  open the throttle.
                        in harbors, channels, or other areas posted
                        with low speed limits as “no wake zones”.  Operating the boat at a steady speed
                        The no-wake mode can be  activated  only  (cruise assist)
                        when the engines are operating at idle speed.  The cruise assist feature is for steady engine
                        To activate the no-wake mode:         speed operation when the boat is traveling
                        (1) Put the remote control levers in the TDE  above no-wake speeds. The cruise assist is
                            position or forward position so that both  available for use whenever the engines are
                            engines are operating at idle speed.  running above 3000 rpm and  below  7000
                        (2) Push the plus side  of the no-wake  rpm.
                            mode/cruise assist switch.  Once “No  To activate the cruise assist:
                            Wake” and the no-wake mode setting  (1) Push the remote control levers forward
                            level is displayed  in  the multi-function  to open the throttle until the desired en-
                            meter, the no-wake mode is activated.  gine speed is reached and both engines
                                                                 are operating at the same engine speed.




                        62
   67   68   69   70   71   72   73   74   75   76   77