Page 183 - LIT-18626-15-30

SportsBoat_F7G11.book Page 171 Friday, May 24, 2024 6:06 PM

Operation

AR220 / SX220 AR220 / SX220 / 222S

1
2
1
3

1 “BLOWER” switch 1 Engine shut-off switch
2 Clip
222SE / 222SD 3 Engine shut-off cord (lanyard)

1 222SE / 222SD

3

1
2
1 “BLOWER” switch

(4) Attach the engine shut-off cord (lanyard) 1 Engine shut-off switch
to your PFD. Install the clip onto the en- 2 Clip
gine shut-off switch by pushing the clip 3 Engine shut-off cord (lanyard)
groove over the nut beneath the knob.
Be sure the cord is not wrapped around TIP:
the steering wheel or tangled in the con- The engines will not start when the clip is re-
trols. WARNING! Check that the en- moved from the engine shut-off switch.
gine shut-off cord (lanyard) is (5) Put the remote control levers in the neu-
attached correctly. If the engine shut- tral position. The starter motors will not
off cord (lanyard) is not attached cor- operate unless the remote control levers
rectly, it may not pull free when the are in neutral.
operator falls off, allowing the boat to (6) AR220 / SX220 / 222S: Turn the main
continue to run and cause an acci- switch keys to the start position and re-
dent. lease them when the engines start. If the
engines do not start after 5 seconds of
cranking, release the keys. Wait at least

171