Page 52 - LIT-18626-15-29

SportsBoat_F5K15.book Page 41 Wednesday, May 22, 2024 1:58 PM

Control function operation

Main switches Main switch (252SE / 252SD)
(AR250 / SX250 / 252S) The main switch controls the ignition circuit
There is a main switch for each engine. as follows:
The main switch controls the ignition and
electrical circuits as follows: ON
OFF
OFF START
ON

1
HORN
BILGE

1 2
1 Main switch

1 Main switch (port engine) OFF:
2 Main switch (starboard engine) Ignition circuit is switched off. The engines
cannot be started. (The main switch key can
OFF: be removed.)
Ignition circuit is switched off. The engine ON:
cannot be started, but other switches will op- Ignition circuit is switched on. (The main
erate. (The main switch key can be removed.) switch key cannot be removed.)
ON:
Ignition circuit is switched on. (The main “START/STOP” buttons
switch key cannot be removed.) (252SE / 252SD)
START: The engines can be started or stopped by
The starter motor will turn to start the engine. pushing the “START/STOP” buttons. It is
(When the main switch key is released, it re- possible to start or stop the engines individu-
turns automatically to “ON”.) ally.
TIP:  PORT: Port engine
 The engine will not start when the clip is re-  STBD: Starboard engine
moved from the engine shut-off switch.
The starter motor will turn over without the
cord attached.
 The main switch will not operate (the starter
motor will not turn over) if the “START”
switch on the battery switch assembly is
turned to the OFF position. (See page 39
for more information.)

41