Page 209 - LIT-18626-15-29
P. 209

SportsBoat_F5K15.book  Page 198  Wednesday, May 22, 2024  1:58 PM



                                                                       Trouble recovery


                        TIP:                                  (4) Move the manual release levers of the
                        The rear platform hatch has interlocks to shut  shift motors to the manual operation po-
                        off the engines should the hatch be acciden-  sition.
                        tally opened during operation.  The engines
                        will not restart unless the hatch is closed and
                        latched.

                        Raising the shift gates
                        (252SE / 252SD)
                        252SE: If the shift actuator malfunctions and
                        the shift gates remain in the lowered position,
                        the boat will not be able to move forward.  1
                        After raising the shift gates so that the boat
                        can move forward, immediately return to  1  Manual release lever
                        shore and have a Yamaha Boat Dealer ser-
                        vice the boat.                        (5) Use a screwdriver or similar tool to re-
                        252SD:  This  model cannot raise the shift  move the shift rod covers.
                        gate. If the shift gate remains lowered, imme-
                        diately contact a Yamaha Boat Dealer or re-       1
                        turn to port immediately with only the engine
                        working properly. (See page 204.)
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip
                            from the engine shut-off switch.
                        (2) Open the driver’s side console compart-
                            ment. (See page 111.)
                        (3) Remove the nuts, and then remove the
                            shift motor cover.
                                                              1  Shift rod cover
                                1                             (6) Slide the shift rods to port (left) to raise
                                                                 the shift gates to the forward position.




                                                       2




                        1  Shift motor cover
                        2  Nut




                                                                                             198
   204   205   206   207   208   209   210   211   212   213   214