Page 58 - LIT-18626-15-28
P. 58

SportsBoat_F4X16.book  Page 48  Monday, May 27, 2024  10:24 AM



                        Instrument operation

                        “CRUISE/NO   WAKE”    (+)  button  or  To deactivate the reverse RPM control:
                        “CRUISE/NO WAKE” (–) button.          Operate the remote control  levers  to  de-
                        To deactivate the no-wake mode:       crease the engine speed to less than 4500
                        Perform one of the following operations.  rpm.
                         Push the “CRUISE/NO  WAKE” (–) button
                          repeatedly until  “No Wake” and  the no-
                          wake mode setting level disappears.
                         Push the remote control levers forward to
                          open the throttle.
                        TIP:
                        275SD: If the throttle/shift paddles are oper-
                        ated in the DRiVE X mode while the no-wake
                        mode is activated, the no-wake mode will be
                        deactivated.

                        Operating the boat in reverse with more
                        thrust (reverse RPM control)
                        Engine speed in reverse is limited to approx-
                        imately 4500 rpm. If more thrust is required
                        when the boat is traveling in reverse, use the
                        reverse RPM control.  WARNING! Be pre-
                        pared to reduce throttle as soon  as the
                        boat moves  as desired.  Otherwise, the
                        boat may become unstable, which could
                        result in loss of control and an accident.
                        To activate the reverse RPM control:
                        (1) Move the remote control levers back-
                            ward so that the throttle is opened in re-
                            verse and both engines are operating at
                            the same engine speed.
                        (2) Increase the engine speed to 4500 rpm,
                            and then push the “CRUISE/NO WAKE”
                            (+) button.
                        Once the reverse RPM control is activated,
                        pushing the “CRUISE/NO WAKE” (+) button
                        will increase the available  engine speed by
                        approximately 500 rpm in 3 stages up to a
                        maximum  of 6000 rpm, and pushing  the
                        “CRUISE/NO WAKE” (–) button will decrease
                        the available engine speed. However, the ad-
                        justment is limited to these 3 increments.



                        48
   53   54   55   56   57   58   59   60   61   62   63