Page 103 - LIT-18626-14-73

SportsBoat_F5K14.book Page 94 Wednesday, September 6, 2023 2:56 PM

Instrument operation

(5) 252XE / 255XE / 255XD: Tap the desired (11) After setting the preceding items, tap the
ballast level. “Set” button.
(6) 252XE / 255XE / 255XD: Tap “ ” or (12) Move the remote control levers to the ful-
“ ” to set the weight of each ballast ly open position.
tank. TIP:
 If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
ed acceleration profile or reach the set tar-
Fill All Drain All get speed.
35 45 35
 If the single lever mode is activated, move
only the remote control lever for the port
engine to the fully open position. (See page
87 for information on the single lever mode
Back Activate
button.)
 255XE / 255XD: Boat speed is limited to 15
TIP:
mph (24 km/h) when deploying Wake-
 Tap “Fill All” to make all of the tanks 100%,
Booster.
and tap “Drain All” to make all of the tanks
 255XE / 255XD: A warning message is dis-
0%.
played on the multi-function display when
 Tap “Activate” to activate the ballast.
overcurrent occurs. The button name on
the side where overcurrent has occurred
(7) 255XE / 255XD: Tap the “Port” button or
turns red.
“Stbd” button of “SURFPOINTE”.
 252SD / 255XD: While the DRiVE X mode is
(8) 255XE / 255XD: Tap “ ” to deploy, tap
activated, the drive control mode cannot
“ ” to stow.
be used.
To deactivate the drive control:
(1) Return the remote control levers to the
neutral position.
Deploy Stow
(2) Tap the “CANCEL” button.

Back
TIP:
Only one flap can be opened.

(9) Tap the “Save” button.
(10) Select the characters you want to set,
tap the “Save” button.

94