Page 64 - LIT-18626-14-70

SportsBoat_F6A11.book Page 57 Thursday, June 15, 2023 8:14 AM

Instrument operation

To deactivate the no-wake mode:
Perform one of the following operations.
 Push the minus side of the no-wake mo-
de/cruise assist switch until “No Wake Mo-
de” and the no-wake mode setting level
disappears.
 Push the remote control levers forward to
open the throttle.

Operating the boat in reverse with
more thrust (reverse RPM control)
Engine speed in reverse is limited to approx-
imately 4500 rpm. If more thrust is required
when the boat is traveling in reverse, use the
reverse RPM control. WARNING! Be pre-
pared to reduce throttle as soon as the
boat moves as desired. Otherwise, the
boat may become unstable, which could
result in loss of control and an accident.
To activate the reverse RPM control:
(1) Move the remote control levers back-
ward so that the throttle is opened in re-
verse and both engines are operating at
the same engine speed.
(2) Increase the engine speed to 4500 rpm,
and then push the plus side of the no-
wake mode/cruise assist switch.
TIP:
Once the reverse RPM control is activated,
pushing the plus side of the no-wake mo-
de/cruise assist switch will increase the avail-
able engine speed by approximately 500 rpm
in 3 stages up to a maximum of 6000 rpm,
and pushing the minus side will decrease the
available engine speed. However, the adjust-
ment is limited to these 3 increments.

To deactivate the reverse RPM control:
Operate the remote control levers to de-
crease the engine speed to less than
4500 rpm.

57