Page 123 - LIT-18626-14-68

SportsBoat_F7H10.book Page 115 Wednesday, June 14, 2023 4:18 PM

Pre-operation checks

Engine shut-off switch check AR190 / SX190
Check the engine shut-off switch for proper
operation.
(1) Start the engine. (See page 117 for infor-
mation on starting the engine.)
(2) Pull the engine shut-off cord (lanyard) to
remove the clip from the engine shut-off
switch to make sure that the engine
stops immediately.
(3) Make sure that the engine cannot be
started with the clip removed from the
engine shut-off switch. TIP:
 The number of cooling water pilot outlets
varies according to the model.
195S / AR195 / SX195: 3 cooling water pilot
2 1
outlets
AR190 / SX190: 1 cooling water pilot outlet
 It may take up to 20 seconds for water to
reach the pilot outlet when first launching
the boat. The amount and force of the exit-
ing water will vary with engine speed.
NOTICE
1 Clip
A continuous flow of water from the pilot
2 Engine shut-off switch
outlet shows that water is flowing through
Cooling water pilot outlet check the engine cooling water passages. If wa-
Check that water comes out from the pilot ter is not flowing out of the pilot outlet dur-
outlet while the engine is running in the water. ing operation, do not continue to run the
If water is not circulating, something may be engine. Overheating and serious damage
clogging the intake grate. Refer to “Jet pump could occur. (See “Over temperature
clean-out procedure” on page 151. warning” on page 63 or 74 for more infor-
195S / AR195 / SX195 mation.)

Fuel level check
Check the amount of fuel remaining in the
fuel tank using the fuel level bar graph on the
multi-function display.

115