Page 202 - LIT-18626-14-67
P. 202

SportsBoat_F7G10.book  Page 193  Wednesday, June 14, 2023  9:23 AM



                        Care and storage

                            (one tablespoon of baking soda to one  (2) Follow  the battery manufacturer’s  in-
                            cup of water).                       structions for charging.  WARNING!
                        (2) Apply dielectric grease or petroleum jelly  When charging a battery, keep it well
                            to the battery terminals  and to all  ex-  away from sparks and open flames, as
                            posed connectors.                    it gives off explosive gases. When us-
                        (3) If the battery will be stored for a longer  ing a battery charger, connect the bat-
                            period, check its state of charge (use a  tery to the charger before you turn on
                            hydrometer or a voltmeter and load tes-  the charger. This will prevent sparking
                            ter) at least once a month and recharge  at the terminals that could ignite bat-
                            the battery if it gets too low.      tery gases.
                        To charge the battery:                To install the battery:
                        (1) Remove the caps from the cells. Add dis-  (1) Place the battery in  the battery holder,
                            tilled  water if necessary  to top up the  and then fasten the battery using the bat-
                            electrolyte to the proper level.     tery strap.
                                                              (2) Connect the positive (+) battery lead (red)
                                                                 to the positive (+) battery terminal.
                                                                 NOTICE: Reversal of the battery leads
                                                                 will damage the electrical parts.
                                                              (3) Connect the negative (–)  battery lead
                                                                 (black) and the ground lead (black) to the
                                                                 negative (–) battery terminal.
                                                              (4) Make sure that the battery is securely
                                                                 held in place.






























                        193
   197   198   199   200   201   202   203   204   205   206   207