Page 56 - LIT-18626-14-06

SportsBoat_F6B13.book Page 49 Tuesday, July 5, 2022 1:00 PM

Instrument operation

Operating the boat with a minimal and the no-wake mode setting level disap-
wake (no-wake mode) pears.
The no-wake mode is useful for operating the  Push the remote control lever forward to
boat at a steady speed with a minimal wake. open the throttle.
This is especially convenient when traveling
in harbors, channels, or other areas posted Operating the boat in reverse with
with low speed limits as “no wake zones”. more thrust (reverse RPM control)
The no-wake mode can be activated only Engine speed in reverse is limited to approx-
when the engine is operating at idle speed. imately 4500 rpm. If more thrust is required
To activate the no-wake mode: when the boat is traveling in reverse, use the
(1) Put the remote control lever in the TDE reverse RPM control. WARNING! Be pre-
position or forward position so that the pared to reduce throttle as soon as the
engine is operating at idle speed. boat moves as desired. Otherwise, the
(2) Push the plus side of the no-wake boat may become unstable, which could
mode/cruise assist switch. Once “No result in loss of control and an accident.
Wake” and the no-wake mode setting To activate the reverse RPM control:
level is displayed in the multi-function (1) Move the remote control lever backward
meter, the no-wake mode is activated. so that the throttle is opened in reverse.
(2) Increase the engine speed to 4500 rpm,
SE S SW
and then push the plus side of the no-
wake mode/cruise assist switch.
TIP:
Once the reverse RPM control is activated,
pushing the plus side of the no-wake
MPH mode/cruise assist switch will increase the
No Wake: available engine speed by approximately 500
rpm in 3 stages up to a maximum of 6000
1 rpm, and pushing the minus side will de-
1 No-wake mode setting level crease the available engine speed. However,
the adjustment is limited to these 3 incre-
TIP: ments.
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the To deactivate the reverse RPM control:
no-wake mode is activated, push the plus Operate the remote control lever to decrease
side or minus side of the no-wake the engine speed to less than 4500 rpm.
mode/cruise assist switch.

To deactivate the no-wake mode:
Perform one of the following operations.
 Push the minus side of the no-wake
mode/cruise assist switch until “No Wake”

49