Page 119 - LIT-18626-14-04

SportsBoat_F4V14.book Page 111 Tuesday, July 5, 2022 2:34 PM

Pre-operation checks

Push the blower switch to operate the blower To check the operation using the navigation
and ventilate the engine compartment for at and anchor lights switch:
least 4 minutes. (1) Push the top of the navigation and an-
chor lights switch and check that the
Navigation and anchor lights checks bow light and anchor light come on.
Make sure that the bow light and anchor light
operate properly. 1
The procedure for setting up the anchor light
varies according to the model. See the page
indicated below for your boat.
CTSY
LIGHTS NAV/ANC BILGE HORN
SX195 / SX190: See page 85.
TIP:
SX195 / SX190: Before operating the boat in
daylight hours after checking the navigation
and anchor lights, store the anchor light.
195S / AR195 / AR190 1 Navigation and anchor lights switch

(2) Push the bottom of the navigation and
2 anchor lights switch and check that only
1 the anchor light comes on.
(3) Put the navigation and anchor lights
switch in the middle position and check
that the bow light and anchor light are
off.

Horn switch check
1 Bow light Push the horn switch and check that the horn
2 Anchor light sounds.

SX195 / SX190
1
2
1 LIGHTS NAV/ANC BILGE HORN
CTSY

1 Horn switch
1 Bow light
2 Anchor light

111