Page 95 - LIT-18626-14-02

SportsBoat_F4Y12.book Page 87 Tuesday, July 5, 2022 1:54 PM

Instrument operation

(5) 252XE: Tap the desired ballast level. To deactivate the drive control:
(6) 252XE: Tap “ ” or “ ” to set the (1) Return the remote control levers to the
weight of each ballast tank. neutral position.
(2) Tap the “CANCEL” button.

Fill All Drain All
35 45 35

Back Activate

TIP:
 Tap “Fill All” to make all of the tanks 100%,
and tap “Drain All” to make all of the tanks
0%.
 Tap “Activate” to activate the ballast.

(7) Tap the “Save” button.
(8) Select the characters you want to set,
tap the “Save” button.
(9) After setting the preceding items, tap the
“Set” button.
(10) Move the remote control levers to the ful-
ly open position.
TIP:
 If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
ed acceleration profile or reach the set tar-
get speed.
 If the single lever mode is activated, move
only the remote control lever for the port
engine to the fully open position. (See page
80 for information on the single lever mode
button.)
 252SD: While the DRiVE mode is activated,
the drive control mode cannot be used.

87