Page 200 - LIT-18626-14-02
P. 200

SportsBoat_F4Y12.book  Page 192  Tuesday, July 5, 2022  1:54 PM



                        Trouble recovery


                        TIP:
                        The rear platform hatch has interlocks to shut
                        off the engines should the hatch be acciden-
                        tally opened during operation.  The engines
                        will not restart unless the hatch is closed and
                        latched.

                        Raising the shift gates
                        (252SE / 252XE / 252SD)                1
                        If the shift actuator malfunctions and the shift
                        gates remain in the lowered position, the boat  1  Manual release lever
                        will not be able to move forward.
                        After raising the shift gates so that the boat  (5) Use a screwdriver or similar tool to re-
                        can move forward, immediately return to  move the shift rod covers.
                        shore and have a Yamaha Boat Dealer ser-
                        vice the boat.                                    1
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip
                            from the engine shut-off switch.
                        (2) Open the driver’s side console compart-
                            ment. (See page 108.)
                        (3) Remove the nuts, and then remove the
                            shift motor cover.


                                1                             1  Shift rod cover

                                                              (6) Slide the shift rods to port (left) to raise
                                                                 the shift gates to the forward position.

                                                       2




                                                                                  1
                        1  Shift motor cover
                        2  Nut

                        (4) Move  the manual release levers of  the
                            shift motors to the manual operation po-
                            sition.
                                                              1  Shift rod




                        192
   195   196   197   198   199   200   201   202   203   204   205