Page 123 - LIT-18626-14-02
P. 123

SportsBoat_F4Y12.book  Page 115  Tuesday, July 5, 2022  1:54 PM



                                                                 Equipment operation

                              Anchor light (SX250)            (3) Open the cap of the anchor light socket,
                        The boat is equipped with a removable an-  fit the protrusion on the anchor light into
                        chor light. It is also the “all-around” light for  the slot in the socket, and then install the
                        navigation at night or in low-visibility condi-  light into the socket.
                        tions. (See page 64 for information on the an-
                        chor light on.)
                        The anchor light is stored in the ski locker.                         3
                        To set up the anchor light:
                        (1) Open the ski locker. (See page 105.)




                                                                1                            2

                                                              1  Cap
                                                    1         2  Slot
                                                              3  Protrusion
                                                              (4) Fit the anchor light stopper into the an-
                                                                 chor light socket.
                        1  Ski locker
                        (2) Remove the anchor light from the anchor
                            light holder.                                                     1







                                  1
                                                  2
                                                              1  Anchor light stopper
                                                              To store the anchor light:
                                                              (1) Pull the anchor light stopper upward, re-
                        1  Anchor light holder
                                                                 move the anchor light, and then close the
                        2  Anchor light
                                                                 cap of the anchor light socket.
                                                              (2) Install the  anchor light into  the anchor
                                                                 light holder, and then close the ski lock-
                                                                 er.






                                                                                             115
   118   119   120   121   122   123   124   125   126   127   128