Page 62 - LIT-18626-14-01
P. 62

SportsBoat_F5K12.book  Page 55  Monday, July 4, 2022  11:40 AM



                        Instrument operation


                                                              TIP:
                                                               If the remote control levers are  moved
                                                               slowly to the fully open position, the boat
                                                               may not accelerate according to the select-
                             Fill All              Drain All   ed acceleration profile or reach the set tar-
                                    35   45   35
                                                               get speed.
                                                               If the single lever mode is activated, move
                                                               only the remote control lever for the port
                                                               engine to the fully open position. (See page
                            Back        Activate
                                                               48 for information on the single lever mode
                                                               button.)
                        TIP:
                                                               Boat speed is limited to 15 mph (24 km/h)
                         Tap “Fill All” to make all of the tanks 100%,
                                                               when deploying WakeBooster.
                          and tap “Drain All” to make all of the tanks
                                                               A warning message is displayed on  the
                          0%.
                                                               multi-function  display when overcurrent
                         Tap “Activate” to activate the ballast.
                                                               occurs. The button name on the side where
                                                               overcurrent has occurred turns red.
                        (7) Tap the “Port” button or “Stbd” button of
                                                               255XD: While the DRiVE mode is activated,
                            “SURFPOINTE”.
                                                               the drive control mode cannot be used.
                        (8) Tap “  ” to deploy, tap “  ” to stow.
                                                              To deactivate the drive control:
                                                              (1) Return the remote control levers to the
                                                                 neutral position.
                                                              (2) Tap the “CANCEL” button.
                                   Deploy     Stow



                            Back

                        TIP:
                        Only one flap can be opened.

                        (9) Tap the “Save” button.
                        (10) Select the characters  you want to  set,
                            tap the “Save” button.
                        (11) After setting the preceding items, tap the
                            “Set” button.
                        (12) Move the remote control levers to the ful-
                            ly open position.




                        55
   57   58   59   60   61   62   63   64   65   66   67