Page 50 - LIT-18626-14-01

SportsBoat_F5K12.book Page 43 Monday, July 4, 2022 11:40 AM

Instrument operation

running above 3000 rpm and below 7000 To deactivate the cruise assist:
rpm. Operate the remote control levers to de-
To activate the cruise assist: crease the engine speed to 3000 rpm or less.
(1) Push the remote control levers forward When “Cruise” and the cruise assist setting
to open the throttle until the desired en- level disappear, the cruise assist is deactivat-
gine speed is reached and both engines ed.
are operating at the same engine speed.
(2) Push the “CRUISE/NO WAKE” (+) button Operating the boat with a minimal
or “CRUISE/NO WAKE” (–) button. When wake (no-wake mode)
the cruise assist is activated, “CRUISE The no-wake mode is useful for operating the
ASSIST” and the cruise assist setting boat at a steady speed with a minimal wake.
level will be displayed under the boat This is especially convenient when traveling
speed. in harbors, channels, or other areas posted
with low speed limits as “no wake zones”.
SE S SW The no-wake mode can be activated only
when the engines are operating at idle speed.
To activate the no-wake mode:
(1) Put the remote control levers in the TDE
position or forward position so that both
MPH engines are operating at idle speed.
(2) Push the “CRUISE/NO WAKE” (+) but-
CRUISE ASSIST:
ton. When the no-wake mode is activat-
1 ed, “No Wake” and the no-wake mode
setting level will be displayed under the
1 Cruise assist setting level
boat speed.
 Once the cruise assist is activated, the set
SE S SW
engine speed can be increased by pushing
the “CRUISE/NO WAKE” (+) button or de-
creased by pushing the “CRUISE/NO
WAKE” (–) button. However, the adjust-
ment is limited to a maximum of 8 incre-
ments above or below the initial cruise MPH
assist setting. Each time a button is No Wake:
pushed, the engine speed will increase or
decrease approximately 100–200 rpm. 1
 While the cruise assist is activated, the en- 1 No-wake mode setting level
gine speed can also be adjusted by operat-
ing the remote control levers. The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the
no-wake mode is activated, push the

43