Page 55 - LIT-18626-13-53

SportsBoat_F6B12.book Page 48 Thursday, May 20, 2021 2:14 PM

Instrument operation

To operate the no-wake mode and cruise as- To deactivate the no-wake mode:
sist, see the following sections. To activate Perform one of the following operations.
the reverse RPM control, see “Reverse RPM  Push the minus side of the no-wake
control” on page 49. mode/cruise assist switch until “No Wake
Mode” disappears.
Operating the boat with a minimal  Push the remote control lever forward to
wake (no-wake mode) open the throttle.
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake. Operating the boat at a steady speed
This is especially convenient when traveling (cruise assist)
in harbors, channels, or other areas posted The cruise assist feature is for steady engine
with low speed limits as “no wake zones”. speed operation when the boat is traveling
The no-wake mode can be activated only above no-wake speeds. The cruise assist is
when the engine is operating at idle speed. available for use whenever the engine is run-
To activate the no-wake mode: ning above 3000 rpm and below 7000 rpm.
(1) Put the remote control lever in the TDE To activate the cruise assist:
position or forward position so that the (1) Push the remote control lever forward to
engine is operating at idle speed. open the throttle until the desired engine
(2) Push the plus side of the no-wake speed is reached and the engine is oper-
mode/cruise assist switch. Once “No ating at the same engine speed.
Wake Mode” is displayed in the multi- (2) Push the plus side or minus side of the
function meter, the no-wake mode is ac- no-wake mode/cruise assist switch.
tivated. Once “Cruise” is displayed in the multi-
function meter, the cruise assist is acti-
vated.
10:27 am
FUEL WATER
0 MPH
100% 67°F 10:27 am
FUEL
100% WATER
67°F
No Wake Mode 0
12.5V MPH
0.3 Avg MPG
12.5V 1350 Cruise +4
RPM
12.5V
0.3 Avg MPG
12.5V 1350
TIP: RPM
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the TIP:
no-wake mode is activated, push the plus  Once the cruise assist is activated, the set
side or minus side of the no-wake engine speed can be increased by pushing
mode/cruise assist switch. the plus side of the switch or decreased by
pushing the minus side. However, the ad-
justment is limited to a maximum of 8 incre-

48